Variation in Laboratory Reporting of Haemolysis – a Need for Harmonisation

Aim

The purpose of this survey was to determine the cut-offs being used by Australian laboratories using their instrument’s Haemolysis Index (HI), whether these cut-offs vary, and at what level of haemolysis (or haemolysis index) did laboratories stop reporting one or more analytes. This was done in response to the large numbers of haemolysed samples reported in the RCPAQAP Key Incident Monitoring and Management System External Quality Assurance program (KIMMS EQA) and lack of information in the literature at the time regarding what to do once a haemolysed sample was identified. As it was known from discussions with laboratory personnel that different instruments reported their HI differently, we asked for the results to be provided in g/L free haemoglobin.

Method

An electronic survey was conducted with participants enrolled in the RCPA Quality Assurance Programs with a total of 68 laboratories responding to this survey. Some questions attracted a lower level of response.

Results

The responses showed a poor understanding of the relationship between HI units and haemoglobin concentration. There was wide variation in the way HI results were reported and thus comparing cut-off values for reporting specific analytes based on the HI was impossible to determine.

Conclusion

There is a need to harmonise the way laboratories report analytes in the presence of haemolysis. This would involve adopting a uniform definition of HI and a protocol for laboratories to confirm for themselves the level of HI at which each analyte is no longer reported, as this is method dependent and so will vary from laboratory to laboratory.     

Decolorization and degradation mechanism of Amaranth by Polyporus sp. S133

Polyporus sp. S133 decolorized the Amaranth in 72 h (30 mg L^?1) under static and shaking conditions. Liquid medium containing glucose has shown the highest decolorization of Amaranth by Polyporus sp. S133. When the effect of increasing inoculum concentration on decolorization of Amaranth was studied, maximum decolorization was observed with 15 % inoculum concentration. Significant increase in the enzyme production of laccase (102.2 U L^?1) was observed over the period of Amaranth decolorization compared to lignin peroxidase and manganese peroxidase. Germination rate of Sorghum vulgare and Triticum aestivum was less with Amaranth treatment as compared to metabolites obtained after its decolorization. Based on the metabolites detected by GC–MS, it was proposed that Amaranth was bio-transformed into two intermediates, 1-hydroxy-2-naphthoic acid and 1,4-naphthaquinone. Overall findings suggested the ability of Polyporus sp. S133 for the decolorization of azo dye and ensured the ecofriendly degradation of Amaranth.     

Effect of surfactants and identification of metabolites on the biodegradation of fluoranthene by basidiomycetes fungal isolate Armillaria sp. F022

The effects of structure and concentration of surfactants on the biodegradation of fluoranthene, a three rings polycyclic aromatic hydrocarbon in the aqueous phase, as well as their effects on the biodegradation and enzyme activity were investigated. The toxicity ranking of studied surfactants is: non-ionic Tween 80 <anionic sodium dodecyl sulfate <cationic Tetradecyltrimethylammonium bromide. The maximum growth of Armillaria sp. F022 (>4,500 mg/L) was showed by Tween 80 (10 mg/L) culture, manifesting that the non-ionic surfactant present in the culture were beneficial to the fungal growth. Laccase showed the highest enzymes activity in all surfactants culture. Non-ionic Tween 80 showed a significant result for laccase activity (1,902 U/L) in the Armillaria sp. F022 culture. The increased enzymes cumulative activity may stem directly from the rising fluoranthene biodegradability as addition of appropriate surfactants. The biotransformation of fluoranthene was greatly improved by Tween 80, and totally fluoranthene degradation was obtained as Tween 80 was 10 mg/L. Two fluoranthene metabolites were isolated from the culture medium and analyzed by a thin layer chromatography, UV visible spectrometer and gas chromatography–mass spectrometry (GC–MS). The oxidation of fluoranthene is initiated by oxygenation at the C-2,3 positions resulting 9-fluorenone. At the end of experiment, one metabolite was detected in the culture extract and identified as phthalic acid. Evidently, Armillaria sp. F022 seems efficient, high effective and deserves further application on the enhanced bioremediation technologies for the treatment of fluoranthene-contaminated soil.     

Proteomic Analysis of the Human Skin Proteome after In Vivo Treatment with Sodium Dodecyl Sulphate

Background

Skin has a variety of functions that are incompletely understood at the molecular level. As the most accessible tissue in the body it often reveals the first signs of inflammation or infection and also represents a potentially valuable source of biomarkers for several diseases. In this study we surveyed the skin proteome qualitatively using gel electrophoresis, liquid chromatography tandem mass spectrometry (GeLC-MS/MS) and quantitatively using an isobaric tagging strategy (iTRAQ) to characterise the response of human skin following exposure to sodium dodecyl sulphate (SDS).

Results

A total of 653 skin proteins were assigned, 159 of which were identified using GeLC-MS/MS and 616 using iTRAQ, representing the most comprehensive proteomic study in human skin tissue. Statistical analysis of the available iTRAQ data did not reveal any significant differences in the measured skin proteome after 4 hours exposure to the model irritant SDS.

Conclusions

This study represents the first step in defining the critical response to an irritant at the level of the proteome and provides a valuable resource for further studies at the later stages of irritant exposure.     

Biodegradation and metabolite transformation of pyrene by basidiomycetes fungal isolate Armillaria sp. F022

Armillaria sp. F022 is a white-rot fungus isolated from a tropical rain forest in Indonesia that is capable of utilizing pyrene as a source of carbon and energy. Enzymes production during the degradation process by Armillaria sp. F022 was certainly related to the increase in biomass. In the first week after incubation, the growth rate rapidly increased, but enzyme production decreased. After 7 days of incubation, rapid growth was observed, whereas, the enzymes were produced only after a good amount of biomass was generated. About 63 % of pyrene underwent biodegradation when incubated with this fungus in a liquid medium on a rotary shaker (120 rpm, 25 °C) for 30 days; during this period, pyrene was transformed to five stable metabolic products. These metabolites were extracted in ethyl acetate, isolated by column chromatography, and then identified using thin layer chromatography (TLC) and gas chromatography–mass spectrometry (GC–MS). 1-Hydroxypyrene was directly identified by GC–MS, while 4-phenanthroic acid, 1-hydroxy-2-naphthoic acid, phthalic acid, and protocatechuic acid were identified to be present in their derivatized forms (methylated forms and silylated forms). Protocatechuic acid was the end product of pyrene degradation by Armillaria sp. F022. Dynamic profiles of two key enzymes, namely laccase and 1,2-dioxygenase, were revealed during the degradation process, and the results indicated the presence of a complicated mechanism in the regulation of pyrene-degrading enzymes. In conclusion, Armillaria sp. F022 is a white-rot fungus with potential for application in the degradation of polycyclic aromatic hydrocarbons such as pyrene in the environment.     

A Reversible Histone H3 Acetylation Cooperates with Mismatch Repair and Replicative Polymerases in Maintaining Genome Stability

Mutations are a major driving force of evolution and genetic disease. In eukaryotes, mutations are produced in the chromatin environment, but the impact of chromatin on mutagenesis is poorly understood. Previous studies have determined that in yeast Saccharomyces cerevisiae, Rtt109-dependent acetylation of histone H3 on K56 is an abundant modification that is introduced in chromatin in S phase and removed by Hst3 and Hst4 in G2/M. We show here that the chromatin deacetylation on histone H3 K56 by Hst3 and Hst4 is required for the suppression of spontaneous gross chromosomal rearrangements, base substitutions, 1-bp insertions/deletions, and complex mutations. The rate of base substitutions in hst3Δ hst4Δ is similar to that in isogenic mismatch repair-deficient msh2Δ mutant. We also provide evidence that H3 K56 acetylation by Rtt109 is important for safeguarding DNA from small insertions/deletions and complex mutations. Furthermore, we reveal that both the deacetylation and acetylation on histone H3 K56 are involved in mutation avoidance mechanisms that cooperate with mismatch repair and the proofreading activities of replicative DNA polymerases in suppressing spontaneous mutagenesis. Our results suggest that cyclic acetylation and deacetylation of chromatin contribute to replication fidelity and play important roles in the protection of nuclear DNA from diverse spontaneous mutations.     

History and nomenclature of the theropod dinosaur tracks Bueckeburgichnus and Megalosauripus

The most recent account of Bueckeburgichnus maximus Kuhn 1958, a distinctive theropod dinosaur track from the Lower Cretaceous of Germany, is shown to be based on a referred specimen mistakenly identified as the holotype and the correct name of this taxon is deemed to be Megalosauripus maximus (Kuhn 1958). This minor revision has important consequences for nomenclature of the many European, Asian, North American and Australian dinosaur tracks attributed to megalosaurian theropods. Many of those tracks were named Megalosauripus, but that name has a confusing multiplicity of meanings and it should be restricted to the highly characteristic dinosaur track formerly identified as Bueckeburgichnus. Other tracks named "Megalosauripus”; (in its several other senses) will require new nomenclature, despite their extensive and repeated revision since 1996. It is recommended that future revision should adopt conventions of the International Code of Zoological Nomenclature. Although previous revisions expressed an intention to adhere to those conventions, these were not put into practice, with the unfortunate result of multiplying the problems that surround the nomenclature of megalosaur tracks. Introduction of the name Megalosauripus maximus (Kuhn 1958) eliminates those burgeoning problems and permits the introduction of new and objective nomenclature for presumed megalosaur tracks.